Upper computer debugging software user manua
输入“/”快速插入内容
Upper computer debugging software user manua
Upper computer debugging software user manua
用户9875用户98752024年7月12日修改
❗
If the parameters, parameter names, functional modules, etc. in this manual are inconsistent with your host computer, please check the software update and upgrade to the latest version.
1.
Quick Start
1.1
Complete parameter settings using the wizard
1.1.1
Select the debugging communication method corresponding to the product.
💡
For example:
Flex-EtherCAT communication type is RS-485 communication method
Flex- pulse type /M odbus communication type /CAN open communication type is USB-HID communication mode
It will scan the device ID , double-click to confirm the connection, after the connection device is completed, you can click the flash test , the device running light flashes quickly to indicate that the device is connected, and then click Next .
1.1.1
Set the rated parameters of the motor
According to the actual parameters of the motor, click Next .
1.1.2
Choose whether to turn on the automatic brake according to the actual motor
If the brake cable is not connected or you do not need to use the drive to release the brake, turn off the motor brake voltage regulation (brake enable) switch and click next .
If you need to use the brake and connect the brake cable correctly, you can choose manual control , manually click the Brake IO button to test that the brake can be released normally, and then click Next .
1.1.3
Set the correct encoder parameters
According to the actual parameter settings of the encoder, after modifying the settings, click issue configuration to the drive , and then manually push the motor, observe the left position current value trend chart has a continuous normal curve, click next .